Chassis power tool sheet metal coating production line
Chassis / power tools / sheet metal parts coating production line is suitable for products: power tool housings, chassis cabinets, fences, various types of sheet metal parts, etc.
Surface treatment: hot water washing-degreasing and rust removal-water washing-surface tone-film-passivated ceramic (silane)-water washing-dripping-surface drying
Coating process: automatic dust removal-preheating-primer-topcoat-varnishing-curing-cooling-lower part
Adjustable temperature: 80 ~ 220 ℃
Thermal energy: electricity, gas, ultraviolet, plate exchange, environmentally friendly fuel.
Thermal energy circulation mode: turbulence, internal circulation, fresh air supply.
Conveying method: hanging type, beat type.
Painting method: reciprocating up and down, robot tracking back and forth, manual painting type, beat type.
Air supply method (optional): slightly positive pressure, slightly negative pressure
Cleanliness level (optional): Thousands, 10,000, 100,000
Environmental protection treatment: adsorption filtration, water circulation, three-way catalysis, spray filtration, etc.
Logistics filtration: delivery box, air shower, cargo shower.
Optional equipment: single coating and single baking; two coating and two baking; three coating and three baking.
Suitable coatings: water-based, oil-based, electrostatic powder, high-temperature paint
Adsorption method for liquid coating: dry / wet
Split coating recycling method: large / small cyclone
Single point lifting weight: 5,15,25,50,100,200KG
Pitch: 150, 250, 300mm
Optional pitch: The pitch can be planned according to the size of the product.
The production line can be used for liquid / powder coating. The structure is welded by square tubes. The spraying room can be equipped with Q235; galvanized sheet; stainless steel sheet; PP sheet and other materials. Conditioning or constant speed. The curing section uses aluminum silicate insulation layer. The thickness is equipped according to the temperature, and it is conveyed in succession or step by step. The front section of the product can be equipped with natural cooling / air cooling and other methods for rapid product cooling and control system. Man-machine interface control, simple operation and fast maintenance.