邮箱地址

chu_run133@163.com

服务热线

+13883286377 李先生

Banner
What are the characteristics of swim immersion pretreatment production line?
- 2020-03-03-

Swimming immersion pre-treatment production line features: It is suitable for the automatic pre-treatment of irregular shapes and many kinds of workpieces.

Key equipment: It is mainly composed of tank, transportation system, infusion system, heating system, and mixing equipment.

The immersion treatment method is to use a crane to immerse the workpiece in the liquid medicine tank, and complete the treatment of the workpiece appearance through physical and chemical methods. Suitable for workpieces with messy appearance and severe rust. An air pipe is provided in the degreasing and coating tank, and the processing liquid is mixed. Depending on the specific conditions of the workpiece, a heating device can be installed in the liquid tank to improve the processing effect.

Working principle: The automatic spray pre-treatment section is composed of five parts: spray box and liquid storage tank, liquid supply pump system, liquid spray system, mist extraction system, and control system. When spraying, the required liquid in the liquid storage tank passes through the liquid supply system. Under the effect of the liquid spraying system, a fan-shaped liquid mist is formed to process the appearance of the product under a certain pressure. During the treatment, the liquid and the appearance of the product provoke a liquid mist It is exhausted by the mist extraction system and adheres to the outstanding working environment indoors.

1. Use pipeline centrifugal pump to drive clean water into the clip-on nozzle. When a certain pressure is generated, the nozzle is fan-shaped, and the eruption angle can be adjusted in any direction, and the cleaning effect is good.

2. Stainless steel transmission wire mesh, corrosion resistance; variable frequency motor speed regulation, stable speed.

3. There are sliding doors on both sides for easy cleaning. The sliding doors are embedded with plexiglass for easy investigation.

4. An external axial fan is installed on the back, and the water mist generated by scouring can be discharged outside.

Our company. Facing customers with excellent product quality, perfect service system, high work efficiency, and satisfying customer needs. . Ensure high-quality design, high-quality production, short engineering cycles, and low investment costs.