邮箱地址

chu_run133@163.com

服务热线

+13883286377 李先生

Banner
Gantry type and hardware pre-treatment production line

Gantry type and hardware pre-treatment production line

Product Details

Equipment title: Gantry type pre-treatment production line

Scope of application: large metal parts, large aluminum (magnesium aluminum) alloys, etc.

Processing characteristics: soaking

Delivery configuration: step hoist, driving

Pre-treatment process: upper part-hot water washing-degreasing and rust removal-water washing-surface adjustment-film-silane (ceramic passivation)-water washing-surface drying-lower part

Material configuration: galvanized sheet, Q235, stainless steel sheet, PP

Heating energy: gas, electricity, etc.

Heating system: burner, heating tube, etc.

Speed: ~ 5M / min (according to site and process planning)

Single-point lifting weight of the conveying line: 250KG ~ 3T (can be customized)

Conveying form: lifting, step walking, beat walking, etc.

Surge nozzle: PP, stainless steel, etc. (adjustable air pressure)

Heating temperature: 45 ~ 65 ℃ (can be customized)

Water transport form: built-in thermal insulation and internal circulation

Water pump body: general, stainless steel, corrosion-resistant pump, etc.

Overflow system: self-overflow (ditch or pipeline is discharged to wastewater treatment equipment)

Backwater system: artesian

Water supply system: self-replenishment for liquid level detection

Solvent monitoring: automatic replenishment equipment for concentration detection (optional)

Device form: welding, assembly, assembly

Capacity: Product planning based on location

Insulation system: aluminum silicate

Emission system: centrifugal exhaust (controllable or adjustable air volume) to environmental protection equipment

Upper and lower pieces: manual

Exhaust air ducts: corrosion-resistant raw materials, galvanized pipes, PP pipes, stainless steel pipes, etc.

Hardware pre-treatment production line coating line is a product that competes in the current assembly line market. The seven components of the coating line: pre-treatment, powder spraying system, paint spray equipment, oven, heat source system, electrical control system, hanging Chain etc. It is suitable for spray painting and plastic treatment of the contours of workpieces, and is mostly used for the coating and camouflage industry of single or small batches of workpieces, and transportation and homework of joint ventures, electric trolleys, and aerial machines.

Dusting system

The small whirlwind + filter element acceptance in powder spraying is a more advanced elder, and the color change is faster. The powder spraying system is imported, and components such as the powder spraying room and the electric machine landing gear are all domestically produced.

Painting equipment

Such as oil spray paint booth, water curtain paint booth, can be painted on the outside of bicycles, car leaf springs, large loaders.

Oven

The oven is one of the tensions in the coating consumer line, and its temperature uniformity is the tension in the quality of the tube coating. The heating system of the oven includes: radiation, hot air cycle and radiation + hot air cycle, etc. The certificate can be divided into single room and passing type, and is equipped with straight-through and bridge type. Hot-air recirculating ovens have good thermal insulation, uniform temperature in the furnace, and low heat loss. After testing, the temperature difference in the furnace is less than ± 3oC, which can reach the performance of similar products.


Inquiry